"How-To" Tutorials: How to Setup a VPN connection
Both Point-to-Point Tunneling protocol (PPTP) or Layer Two Tunneling Protocol (L2TP) are automatically installed on your Windows XP-based computer. These protocols help provide security when you access resources on a network by connecting to a remote access server through the Internet or other network. This kind of connection is known as a VPN connection.
back to the top
|1.||Click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.|
|2.||Click Create a new connection, and then click Next.|
|3.||Click Connect to the network at my workplace, and then click Next.|
|4.||Click Virtual Private Network connection, and then click Next.|
|5.||Type a descriptive name for your company, and then click Next.|
|6.||Click Do not dial the initial connection, and then click Next.|
|7.||Type the host name or IP address of the computer where you are connecting, and then click Next.|
|8.||Use one of the following methods:
|9.||Click Next, and then click Finish.|
|1.||To open an existing connection, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.|
|2.||Click the connection, and then click Change settings of this connection.
This article viewed
27643 times as of 07/04/2020
First published on 12/07/2004
Last modified on 12/07/2004
Note: Some of our articles were originally published several years ago. There may be errors or newer information. If you find an error, please use the Contact page to let us know. We create these articles as a public benefit to our fellow IT Support and network administration professionals.